icon
What Metal Work Can Be Done After Treating Dry Rot Back to Blog

What Metal Work Can Be Done After Treating Dry Rot

Dry rot is one of the increasingly widespread concerns for homeowners across the country,

known as the most common cause of wood damage in residential properties. If not treated promptly, the structural integrity of your property would be at risk. Dry rot is caused by specific fungi - referred to as wood-decay fungus - which destroys the part of the wood that gives it integrity and strength.

What makes dry rot dangerous is its ability to progress fast and extensively through a property. If there's dry rotting in any part of your home, it's important to implement effective dry rot treatment and preventative solutions.

Dry Rot Prevention Using Metal Work

There are various solutions used today to prevent the regeneration of dry rot in a carefully and efficient way. One of them is the use of metal work on affected areas like floors, decks, roofs, foundation structures and exterior walls. The most commonly used metal work for dry rot prevention include:

? Thin aluminium flashing

? Vinyl siding

? Other non-corrosive sheet metals

Considering that dry rot flourishes in damp areas that are mostly inadequately ventilated, it's common to find the problem in hard-to- reach areas like behind skirting boards, under floorboards, behind door and window frames and casings, and other unseen areas like building foundations.

What Metals are Used to Cover Dry Rot?

Different types of metals are used for dry rot treatment and prevention. Metal flashings and vinyl sidings can be made of various metals, including:

? Aluminium

? Copper

? Galvanised metal, like steel

? Tin

? Iron

? Lead

Aluminium and copper are the most widely used flashing and siding metals when it comes to preventing dry rot. For instance, flashings installed where a chimney, skylight, plumbing vent, or air vent extends up through a roof stops water from seeping into the roof, preventing water or moisture, which would trigger dry rot.

 

When using metal flashings to prevent wood rot or dry rot regeneration, you must always choose flashings that are compatible with adjoining building materials used to prevent galvanic corrosion. This happens when different metals come in contact with each other. If you're using copper flashing for your deck, make sure to use copper nails. If not possible use a physical barrier to separate the two metals. 

To ensure quality metalwork, you need a company like Metal Supply that provides reliable supplies for your structural building and dry out prevention plans.

Are There Long-Term Dangers to Structures?

While many homeowners often consider metal work as a preventative measure after treating dry out, it's important to understand that there are some dangers associated with the use of metal work, especially on poor foundations. The biggest danger is a weakened building structure. Failure to regularly inspect and maintain flashings, vinyl sidings and other non-corrosive metals used for the purposes of dry out prevention will likely lead to a further spread of dry out infection.

Damage to your wood structures like floors or walls is a major hazard to your home. Dry rot that goes unnoticed will also attract pests like termites that will cause further problems down the line.

Possible Solutions

? Make sure that the metal used, like aluminium and galvanised flashing, doesn't come into contact with pressure-treated wood, wet mortar, and salty water. If this happens, they will soon corrode and expose your treated wood to dry rot infection.

? Wood makers today are also using metal fragments made of special heavy alloys in the construction of wood used for structural building. This is being done to help wood better resist rot or decay.

? It's important also to ensure that metal flashings, sidings, and other metal work on wood structures are working at their best to ensure maximum dry out protection. Make sure that you also eradicate all sources of moisture in your home and promote rapid drying in your structure

Use the services of professional and qualified dry rot treatment expert to identify the best metal work or alternative methods that can be used to prevent dry rot regeneration after treatment and also repair the damaged wood or timber.

Author Bio:

Carolyn Clarke is a metal fabrication expert who specialises in offering custom metal fabrication services in the residential market in Los Angeles, CA. She is a licensed fabricator with a passion for creating innovative solutions for homeowners and businesses. She has worked on numerous small and medium metal fabrication and installation projects in and around the city.

 

Leave a reply

Your email address will not be published. Required fields are marked *

Captcha
You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> 
<del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>